Identification and quantification of gaseous compounds emitted by samples during isotherms or temperature ramps.
Would you like to determine the ash content of your samples? The Calnesis laboratory carries out this type of...
Measurement of the auto-ignition (or self-ignition) temperature of samples
Measurement of the boiling temperature of samples carried out by the laboratory by differential scanning calorimetry.
Compression tests with adaptation of the protocol acording with the samples and the needs.
Measurements of solid/liquid contact angles using a temperature-regulated optical bench.
Characterization of the thermal degradation of compounds carried out by calorimetry.
Determination of water in your samples using the Karl Fischer Coulometry method: liquids, powders, etc. High precision.
Measurements of the elongation at break of solid samples carried out with tensile tests
Determination of the glass transition of samples. Different techniques: calorimetry, dilatometry
Are you looking to measure the heat capacity of your samples? The Calnesis laboratory carries out these measurements by...
Determination of the upper and lower explosive limit of solid, liquid or gaseous samples
Mixing enthalpy measurement by flow calorimetry carried out by the Calnesis laboratory, when the compounds allow it.
Liquid sample refractive index measurement carried out at controlled temperature.
Measurement of the specific heat of samples by calorimetry over a wide temperature range (-80°C to 600°C).
Measurement of the thermal Capacity of samples over a wide temperature range (-80°C to 600°C).
Measurement of the thermal Conductivity of Samples over a wide temperature range.
Measurement of the thermal conductivity of liquid samples over a wide temperature range: water, oil, gasoline, etc.
Measurement of the volumetric thermal expansion coefficient of liquids over a wide temperature range
Measurement of the turbidity of liquids on a wide range of samples, in particular water samples.
Vaporization enthalpy measurement carried out by the laboratory which carries out these measurements by DSC
You need to determine the viscosity of your samples? The Calnesis Laboratory carries out this type of measurement using...
Measurements of the yield point of solid samples measured during tensile or compression tests